 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS CG Chip Type, Higher Capacitance series Higher Capacitance, Low ESR, High ripple current. Load life of 2000 hours at 105C. SMD type : Lead free reflow soldering condition at 260C peak correspondence. Adapted to the RoHS directive (2002/95/EC). CG Higher Capacitance CF Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance tan ESR ( 1) Leakage Current ( 2) -55 to +105C 2.5 to 16V 47 to 3300F 20% at 120Hz, 20C Not more than value of Standard ratings Not more than value of Standard ratings Not more than value of Standard ratings. 1.25 1.25 Capacitance change tan ESR ( 1) Leakage current ( 2) Within 20% of initial value ( 3) 150% or less of the initial specified value 150% or less of the initial specified value Initial specified value or less (100kHz) at 120Hz, 20C at 100kHz, 20C After 2 minute's application of rated voltage. 20C Performance Characteristics Characteristics of Temperature Z+105C / Z+20C Impedance Ratio Z - 55C / Z + 20C After 2000 hours' application of rated voltage Endurance at 105C, capacitors meet the specified value for life characteristics listed at right. After 1000 hours' application of rated voltage Damp Heat at 60C 90%RH, capacitors meet the specified value for life characteristics listed at right. Capacitance change tan ESR ( 1) Leakage current ( 2) Within 20% of initial value ( 3) 150% or less of the initial specified value 150% or less of the initial specified value Initial specified value or less To comply with recommended conditions for reflow soldering. Pre-heating shall be done at 150 to 200C and for 60 to 180 sec. In the case of peak temp, less than 250C, Resistance to Soldering Heat reflow soldering shall be within two times. In the case of peak temp, less than 260C, reflow soldering shall be once. Measurement for solder temperature profile shall be made at the capacitor top and the terminal. Marking Navy blue print on the case top. Capacitance change tan ESR ( 1) Leakage current ( 2) Within 10% of initial value ( 3) 130% or less of the initial specified value 130% or less of the initial specified value Initial specified value or less 1 ESR measurements should be made at a point on the terminal nearest where the ternimals protrude through the plastic platform. 2 Conditioning : If there is doubt about the measured result, measurement should be made again after the rated voltage is applied for 120 minutes at the temperature of 105C. 3 Initial value : The value before test of examination of resistance to soldering. CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS CG Capacitance series Dimensions Voltage ( j:6.3V ) Plastic platform 0.3 MAX. C 0.2 Positive 0.5 MAX. Type numbering system (Example : 6.3V 470F) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PCG 0 J 4 7 1 MC L 1 GS A0.2 D+0.5 MAX. B0.2 CG 470 j 741 E Taping code Configuration Capacitance tolerance (20%) Series Lot No. L +0.1 - 0.4 Negative H (mm) Rated Capacitance (470F) 10 x 12.7L 10.0 12.6 11.0 10.3 10.3 4.6 0.8 ~ 1.1 Size D L A B C E H 5 x 6L 5.0 5.9 6.0 5.3 5.3 1.2 0.5 ~ 0.8 6.3 x 6L 6.3 5.9 7.3 6.6 6.6 2.1 0.5 ~ 0.8 8 x 7L 8.0 6.9 9.0 8.3 8.3 3.2 0.8 ~ 1.1 10 x 8L 10.0 7.9 11.0 10.3 10.3 4.6 0.8 ~ 1.1 10 x 10L 10.0 9.9 11.0 10.3 10.3 4.6 0.8 ~ 1.1 Rated voltage (6.3V) Series name Type Voltage V Code 2.5 e 4 g 6.3 j 10 A 16 C Standard ratings Rated Voltage (V) Code Surge Voltage (V) Rated Capacitance (F) Case Size D x L (mm) tan Leakage Current (A) ESR (m) (20C / 100kHz) Rated ripple (mArms) (105C / 100kHz) Code 220 470 560 5x6 6.3 x 6 6.3 x 6 8x7 10 x 8 10 x 10 10 x 12.7 5x6 6.3 x 6 8x7 10 x 8 10 x 10 10 x 12.7 5x6 6.3 x 6 6.3 x 6 8x7 10 x 8 10 x 10 10 x 12.7 5x6 6.3 x 6 8x7 10 x 8 10 x 10 10 x 12.7 5x6 6.3 x 6 8x7 10 x 8 10 x 10 10 x 12.7 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 110 235 280 410 750 1350 1650 144 312 544 960 1760 2160 189 340 416 592 1260 2268 2772 164 300 660 1120 1640 2000 150 262 480 864 1504 2176 30 20 20 20 17 12 10 32 22 21 17 13 11 33 23 23 22 18 14 12 35 25 23 20 15 13 40 30 28 25 20 18 2100 2900 3000 3300 4100 4700 5500 1900 2700 3200 4000 4600 5300 1800 2600 2700 3100 3800 4400 5000 1700 2500 3100 3600 4300 4800 1500 2300 2800 3300 3700 4100 PCG0E221MCL1GS PCG0E471MCL1GS PCG0E561MCL1GS PCG0E821MCL1GS PCG0E152MCL1GS PCG0E272MCL1GS PCG0E332MCL1GS PCG0G181MCL1GS PCG0G391MCL1GS PCG0G681MCL1GS PCG0G122MCL1GS PCG0G222MCL1GS PCG0G272MCL1GS PCG0J151MCL1GS PCG0J271MCL1GS PCG0J331MCL1GS PCG0J471MCL1GS PCG0J102MCL1GS PCG0J182MCL1GS PCG0J222MCL1GS PCG1A820MCL1GS PCG1A151MCL1GS PCG1A331MCL1GS PCG1A561MCL1GS PCG1A821MCL1GS PCG1A102MCL1GS PCG1C470MCL1GS PCG1C820MCL1GS PCG1C151MCL1GS PCG1C271MCL1GS PCG1C471MCL1GS PCG1C681MCL1GS 2.5 (0E) 2.8 820 1500 2700 3300 180 390 680 4 (0G) 4.6 1200 2200 2700 150 270 330 6.3 (0J) 7.2 470 1000 1800 2200 82 150 10 (1A) 11.5 330 560 820 1000 47 82 16 (1C) 18.4 150 270 470 680 Design, Specifications are subject to change without notice. Printed in Japan T.2007.B.3C |
Price & Availability of PCG0G122MCL1GS
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |